* Sea-Bird SBE 9 Data File:
* FileName = D:\1011NH\1011001.hex
* Software Version Seasave V 7.20g
* Temperature SN = 5109
* Conductivity SN = 3568
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Oct 28 2010 10:13:04
* NMEA Latitude = 32 57.04 N
* NMEA Longitude = 117 18.31 W
* NMEA UTC (Time) = Oct 28 2010 17:40:58
* Store Lat/Lon Data = Append to Every Scan
** Ship:  R/V New Horizon
** Cruise:  1011NH
** Station:  93.3 26.7
** Cast:  001
** Operator:  MGS
** Cast Type:  PRODO
# nquan = 34
# nvalues = 67                          
# units = specified
# name 0 = scan: Scan Count
# name 1 = timeJ: Julian Days
# name 2 = prDM: Pressure, Digiquartz [db]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = t190C: Temperature, 2 [ITS-90, deg C]
# name 5 = v0: Voltage 0
# name 6 = v1: Voltage 1
# name 7 = v2: Voltage 2
# name 8 = v3: Voltage 3
# name 9 = v4: Voltage 4
# name 10 = v5: Voltage 5
# name 11 = v6: Voltage 6
# name 12 = v7: Voltage 7
# name 13 = spar: SPAR/Surface Irradiance
# name 14 = par: PAR/Irradiance, Biospherical/Licor
# name 15 = bat: Beam Attenuation, Chelsea/Seatech/Wetlab CStar [1/m]
# name 16 = xmiss: Beam Transmission, Chelsea/Seatech/Wetlab CStar [%]
# name 17 = flSP: Fluorescence, Seapoint
# name 18 = latitude: Latitude [deg]
# name 19 = longitude: Longitude [deg]
# name 20 = depSM: Depth [salt water, m], lat = 32.9507
# name 21 = potemp090C: Potential Temperature [ITS-90, deg C]
# name 22 = potemp190C: Potential Temperature, 2 [ITS-90, deg C]
# name 23 = sal00: Salinity [PSU]
# name 24 = sal11: Salinity, 2 [PSU]
# name 25 = sigma-é00: Density [sigma-theta, Kg/m^3]
# name 26 = sigma-é11: Density, 2 [sigma-theta, Kg/m^3]
# name 27 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 28 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l], WS = 2
# name 29 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg], WS = 2
# name 30 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 31 = dm: Dynamic Meters [10 J/Kg]
# name 32 = sva: Specific Volume Anomaly [10^-8 * m^3/Kg]
# name 33 = nbin: number of scans per bin
# span 0 =       -298,       7187       
# span 1 = 301.736638, 301.740248       
# span 2 =      1.007,     67.486       
# span 3 =    10.5188,    18.5350       
# span 4 =    10.5196,    18.5360       
# span 5 =     4.1158,     4.3710       
# span 6 =     0.0273,     0.4797       
# span 7 =     0.1070,     3.3584       
# span 8 =     1.4056,     4.4063      
# span 9 =     1.4417,     2.6105      
# span 10 =     1.6238,     3.0000      
# span 11 =     2.9637,     3.0220      
# span 12 =     0.2547,     1.0610      
# span 13 = 5.0903e+02, 2.2440e+03      
# span 14 = -4.719e-04, 1.9153e+02      
# span 15 =     0.3869,     0.6309      
# span 16 =    85.4101,    90.7803      
# span 17 = 8.1908e-02, 1.4390e+00      
# span 18 =   32.95688,   32.95701      
# span 19 = -117.30764, -117.30739      
# span 20 =      1.000,     67.000      
# span 21 =    10.5111,    18.5347      
# span 22 =    10.5119,    18.5356      
# span 23 =    33.3034,    33.5886      
# span 24 =    33.3041,    33.5873      
# span 25 =    23.9731,    25.7626      
# span 26 =    23.9714,    25.7607      
# span 27 =    3.04813,    5.98386      
# span 28 =    3.06976,    6.01363      
# span 29 =    132.758,    260.576      
# span 30 =   48.37810,  107.83399      
# span 31 =    -0.0054,     0.2148      
# span 32 =    223.740,    392.685      
# span 33 =         29,       1082      
# interval = meters: 1                  
# start_time = Oct 28 2010 17:40:58
# bad_flag = -9.990e-29
# <?xml version="1.0" encoding="UTF-8"?>
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5109</SerialNumber>
#       <CalibrationDate>09-Jun-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33481292e-003</G>
#       <H>6.37676186e-004</H>
#       <I>2.14632662e-005</I>
#       <J>1.94712471e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3568</SerialNumber>
#       <CalibrationDate>12-Mar-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.87880691e+000</G>
#         <H>1.20790528e+000</H>
#         <I>-2.45617897e-003</I>
#         <J>2.20421096e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>112780</SerialNumber>
#       <CalibrationDate>3/27/2009</CalibrationDate>
#       <C1>-4.164639e+004</C1>
#       <C2>-5.769818e-001</C2>
#       <C3>1.259600e-002</C3>
#       <D1>3.483300e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.004422e+001</T1>
#       <T2>-4.702082e-004</T2>
#       <T3>4.039850e-006</T3>
#       <T4>3.117530e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281400e-002</AD590M>
#       <AD590B>-9.348338e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5102</SerialNumber>
#       <CalibrationDate>17-Mar-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.39420160e-003</G>
#       <H>6.44178178e-004</H>
#       <I>2.29156014e-005</I>
#       <J>2.15530553e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3569</SerialNumber>
#       <CalibrationDate>09-Jun-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.99870573e+000</G>
#         <H>1.20554849e+000</H>
#         <I>-1.53083139e-003</I>
#         <J>1.53849440e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Transmissometer, Chelsea/Seatech/Wetlab CStar -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1170DR</SerialNumber>
#       <CalibrationDate>8/20/2008</CalibrationDate>
#       <M>21.0460</M>
#       <B>-1.2115</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2483</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>1</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>46604</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70209</SerialNumber>
#       <CalibrationDate>2 Feb 2010</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>133510000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.75330000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1590</SerialNumber>
#       <CalibrationDate>25-Sep-10p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc> 0.5164</Soc>
#         <offset>-0.4857</offset>
#         <A>-3.6561e-003</A>
#         <B> 1.5430e-004</B>
#         <C>-3.1025e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.9263e-004</D1>
#         <D2>-4.6480e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1500</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1075</SerialNumber>
#       <CalibrationDate>28-Sep-10p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc> 0.4365</Soc>
#         <offset>-0.5014</offset>
#         <A>-2.7138e-003</A>
#         <B> 1.8094e-004</B>
#         <C>-3.4243e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.9263e-004</D1>
#         <D2>-4.6480e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>180709</SerialNumber>
#       <CalibrationDate>3/26/09</CalibrationDate>
#       <Slope>4.5286</Slope>
#       <Offset>2.5333</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>111</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>ISUS</SensorName>
#       <A0>-8.37535100</A0>
#       <A1>27.10211200</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>6367NH</SerialNumber>
#       <CalibrationDate>8/10/09</CalibrationDate>
#       <ConversionFactor>1612.64000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = May 05 2011 13:11:16, 7.19
# datcnv_in = D:\Cruise_Data\1011_Processing\CTD\1011001.hex D:\Cruise_Data\1011_Processing\CTD\1011NH_DoNotMoveMeXmissISUS.con
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# wfilter_date = May 05 2011 13:27:34, 7.19
# wfilter_in = D:\Cruise_Data\1011_Processing\CNV\1011001.cnv
# wfilter_excl_bad_scans = yes
# wfilter_action prDM = median, 9
# wfilter_action t090C = median, 9
# wfilter_action c0S/m = median, 9
# wfilter_action t190C = median, 9
# wfilter_action c1S/m = median, 9
# wfilter_action v0 = median, 9
# wfilter_action v1 = median, 9
# wfilter_action v2 = median, 9
# wfilter_action v3 = median, 9
# wfilter_action v4 = cosine, 500
# wfilter_action v5 = median, 9
# wfilter_action v6 = median, 9
# wfilter_action v7 = median, 9
# wfilter_action sbeox0V = median, 9
# wfilter_action sbeox1V = median, 9
# wfilter_action spar = median, 9
# wfilter_action par = median, 9
# wfilter_action bat = median, 9
# wfilter_action xmiss = median, 9
# wfilter_action flSP = median, 9
# wfilter_action latitude = median, 9
# wfilter_action longitude = median, 9
# filter_date = May 05 2011 13:33:34, 7.19
# filter_in = D:\Cruise_Data\1011_Processing\CNV\1011001.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# alignctd_date = May 05 2011 13:42:41, 7.19
# alignctd_in = D:\Cruise_Data\1011_Processing\CNV\1011001.cnv
# alignctd_adv = sbeox0V 4.000, sbeox1V 4.000                                                                                                                                                                                        
# celltm_date = May 05 2011 13:47:49, 7.19
# celltm_in = D:\Cruise_Data\1011_Processing\CNV\1011001.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# Derive_date = May 05 2011 13:53:55, 7.19
# Derive_in = D:\Cruise_Data\1011_Processing\CNV\1011001.cnv D:\Cruise_Data\1011_Processing\CTD\1011NH_DoNotMoveMeXmissISUS.con
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# split_date = May 06 2011 09:35:31, 7.19
# split_in = D:\Cruise_Data\1011_Processing\CNV\1011001.cnv
# split_excl_bad_scans = yes
# binavg_date = May 06 2011 09:47:04, 7.19
# binavg_in = D:\Cruise_Data\1011_Processing\CNV\split\d1011001.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*